Background and Aim: In patients with complete denture, some clinicians have used modelling plastic impression compound (MPIC) along tissue conditioner (TC) materials simultaneously. Little information is available on the composition of these materials and the interaction between them. The purpose of this study was to evaluate the influence of two components of MPIC on the structure and chemical composition of TC.Materials and Methods: In this experimental study, MPIC specimens were provided in 25×2 mm discs. Specimens were randomly divided into three groups and were immersed in ethanol 70%, plasticizer (dibutyl phthalate) and a mixture of them (ethanol 70% and dibutyl phthalate). All of the discs were weighed with a digital balance before and 2, 4, 6 and 24 hours after immersion. Values were analyzed by non parametric Kruskal-Wallis (a= 0.05) and SPSS 16 for Windows (SPSS Inc., Chicago, IL) was used for statistical analysis.Results: Statistical analysis indicated significant differences among all groups (p>.05).Conclusion: Dibutyl phthalate (DBP) had high impact on the solubility of MP, while the mixture of dibutyl phthalate (DBP) and ethanol demonstrated the highest impact.

plastic hinge properties play a crucial role in predicting the nonlinear response of structural elements. The plastic hinge region of reinforced concrete normal beams has been previously studied experimentally and analytically. The main objective of this research is to evaluate the behavior of the plastic hinge region of reinforced concrete deep beams and its comparison with normal beams through finite element simulation. To do so, ten beams contain six deep beams, and four normal beams, under concentrated and uniformly distributed loading, are investigated. Lengths in the plastic hinge region involving curvature localization, rebar yielding, and concrete crushing zones are studied. The results indicate that the curvature localization zone is not suitable for the prediction of plastic hinge length in reinforced concrete deep beams. Based on the results it can be stated that in simply supported normal beams the concrete crushing zone is focused on the middle span, but in simply supported deep beams by creating a compression strut between loading place and support, the concrete crushing zone spreads along the compression trajectory. The rebar yielding zone of simply supported beams increases as the loading type is changed from the concentrated load at the middle to the uniformly distributed load.

In this research, the behavior of plastic concrete materials with a strain Hardening/Softening Elasto-plastic constitutive model are investigated using FLAC software based on a series of drained triaxial test results. The constitutive model is based on the mobilized strength (friction and cohesion) and mobilized dilatation angle concepts. The results indicate that the assumed functions of modified mobilized friction angle and mobilized cohesion (The Yield function of the model) which are common for geotechnical materials, can predict stress-strain behavior with a sufficient accuracy. However, they cannot simulates the Volume changes due to dilation effects accurately, especially for plastic concrete with a relatively high stiffness and strength. Therefore, the potential function of the model is modified. The stress-strain and Volume strains that have been obtained from the modified model are in good agreement with the experimental data, especially for soft plastic concrete, as well as for hard plastic concrete in a low confining pressure.

Introduction: Esthetic surgeries are among the commonest medical procedures in the world nowadays; and as statistics declare, there has been a rapid increase in the rate of rhinoplasty during the recent years. Hence, as the number of cosmetic surgeries rises, the increment in the number of physicians being sued is quite inevitable; either due to complication in rhinoplasties or even inability to fulfill the patients’ expectations. This article aims to clarify the aspects of causes leading to these legal claims.Materials and Methods: We designed a retrospective study according to the available files in the Iranian Organization for Forensic Medicine in which physicians were sued for the outcomes of rhinoplasty through the years 2004 to 2010. In addition, information on the patients’ demographic data, surgeons’ specialty and experience, and method of anesthesia were also collected.Results: 126 patients entered the study among which 77 (61%) were female and 49 (39%) male. Mean age was obtained as 26.9±7.7yrs. Up to 79.4% of patients had complaints concerning the cosmetic outcomes, 39.7% with respiratory and 4.8% with olfactory problems. The reason to sue the physician had a significant relationship with the patients’ age and sex, and also with the surgeons’ experience.Conclusion: There are multiple reasons impelling the patients to sue surgeons after rhinoplasty, some are related to physicians’ malpractice and some to the patients’ social and personal circumstances

Introduction: Evaluation and treatment of foreign bodies in rectum involves careful history and physical examination. The cases of forced introduction of the objects most commonly are sexual assault, self - introduced for anal eroticism and accidental insertion.Case Report: We describe a case of a patient with rectal impaction following self administration of a plastic bottle for anal sexual gratification. A 49 years old man was admitted in the emergency department with the history of self introduced a bottle into his rectum physical examination and abdominal X-Ray diagnosed the case as impacted foreign body in rectosigmoid. An attempt was made to deliver the bottle through the rectum but because of high lying big bottle in the sigmoid laporotomy was performed and the bottle was removed though a longitudinal incision on sigmoid colon.Conclusion: Retained rectosigmoid foreign bodies have been encountered more frequently and present a dilemma for management and rarely laporotomy for extraction of foreign bodies was performed.